2.4M x 0.6M Acoustic Slat Panel pack of 2 Walnut

A contemporary acoustic slat panel designed to transform your home or work environment. Made with a MDF slat core and wood veneer giving that contrast to a full feature wall. Acoustic panels are fixed to a sturdy black felt backing for easy installation.

2400mm x 600mm Acoustic Slat Panel Installation Instructions

Tools and materials required

• Construction adhesive (such as Fix-All nails or similar)
• Screws and anchors (appropriate for your wall type)
• Screwdriver or drill
• Measuring tape
• Level
• Pencil
• Utility knife or saw (for cutting panels to size if required)
• Caulk gun (for adhesive)

Step-by-step Guide

1. Preparation

• Clean the walls: Make sure the wall surface is clean, dry, and free of dust or debris. This ensures better adhesion.
• Measure the wall: Measure the area where you plan to install the panels to determine the layout and how many panels you’ll need.
• Mark the layout: Use a pencil and level to mark the placement of each panel on the wall. This will help you position the panels correctly.

2. Cutting panels (if required)

• Measure and mark: Measure the panels and mark where they need to be cut.
• Cut the panels: Use a utility knife or saw to cut the panels to the desired size. Be sure to cut on a stable surface and wear safety gear.

3. Applying adhesive

• Load the caulk gun: Insert the construction adhesive into the caulk gun.
• Apply a generous amount of adhesive to the back of the acoustic panel. Create a zigzag pattern or apply dots of adhesive around the edges and centre of the panel.

4. Placing the panels

• Carefully place the panel onto the wall according to your layout marks.
• Press the panel firmly against the wall to ensure good adhesion. Hold it in place for a minute or so to

5. Securing with screws

• Mark screw locations: Mark the locations where you will insert screws. Aim for corners and the centre of the panel.
• If you’re installing on drywall or a similar surface, drill pilot holes for the screws.
• Insert screws: Insert screws through the panel into the wall. If you’re using anchors, insert them first, then screw into the anchors.
• Ensure the screws are tight but not so tight that they deform the panel.

6 Finishing touches

• Wipe off any excess adhesive that may have squeezed out from behind the panels.
• By following these steps, you should
• be able to install your acoustic
• panelling effectively.

Useful tips

Work with a partner It’s easier to position and secure panels accurately with two people.
Check for level Use a level frequently to ensure panels are straight.
Test the adhesive on a small section to make sure it holds well before proceeding with the entire installation.

Good luck with your project