15mm x 1/2" Speedfit Straight Tap Connector

Available as 15mm x 1/2", 15mm x 3/4", and 22mm x 3/4" variations, these Speedfit Straight Tap Connectors are push-fit plastic fittings made for the connection of plastic and copper pipe. Designed, manufactured and assembled in the UK by John Guest Speedfit.

To fit, simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. 

The straight tap fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods.

Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.

Features of the Straight Tap Connector:

• Push-fit and demountable connections
• Suitable for hot and cold water and central heating systems
• Grip and Seal connection
• Lead-free and non-toxic
• No scale build up and corrosion free
• BSI and WRAS approved