15mm x 300mm x 1/2" Speedfit Tap Connector With Service Valve

This single 300mm long Service Valve Tap Connector is available in both 15mm and 22mm sizes, and uses a push-fit connection to facilitate the joinming of plastic and copper pipe. It has been designed, manufactured and assembled in the UK by John Guest Speedfit.

The valve allows the user to stop the flow of water to a tap in case of emergency or repair via a 1/4 turn of a screw on the valve.

To connect, simply push the valve fully on to the pipe and connect the tap connection on to male thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods.